Fenigal Btcoops - Specialized Balloon Light, Inflatables, Electricals, Equipment and Tools
Fenigal Btcoops - Specialized Balloon Light, Inflatables, Electricals, Equipment and Tools
Translate this website

Google Translate is loaded only when you open this panel, reducing unnecessary requests and layout work during the first page load.

Loading language options…
Request Quote
Product Updates

How to Rig Air-Filled Balloon Lights on Film Sets | Artemis

Professional Product Detail

How to Rig Air-Filled Balloon Lights on Film Sets | Artemis

A practical guide to air-filled balloon light rigging: site checks, approved hardware, power routes and installation planning for film sets.

Category: Product Updates

How to Rig Air-Filled Balloon Lights on Film Sets

Not every set has a crane. Not every location allows helium. And not every ceiling is high enough to float a balloon safely. But the need for a large, soft source doesn‘t disappear when the ideal conditions do.

This is where the air-filled balloon light enters the conversation. It is a distinct deployment option. It is a different rigging logic: the balloon becomes a suspended fixture rather than a floating one, and the soft light quality remains the same.

This guide focuses on planning and reviewing air-filled balloon suspension on film sets. It explains what needs checking before a qualified installation team prepares an approved model- and venue-specific rigging plan.

What Air-Filled Rigging Actually Means

An air-filled Artemis balloon does not float. It is suspended from overhead rigging points, mounted on tripod stands, or hung from existing structures. The balloon envelope still emits soft light radially, but the positioning responsibility shifts from gas physics to grip and rigging.

btcoops.com lists the Artemis Sphere, Ellipse, Cube, and Tube versions as supporting air filling for equipment hanging and rigging suspension applications. This is not an afterthought configuration. It is a core deployment mode for sets where helium is impractical, unavailable, or simply the wrong tool for the location.

The Rigging Decision That Separates Balloon from Softbox

Rigging Variable

Air-Filled Balloon

Softbox

Attachment method

Suspension from overhead points (truss, pipe grid, beam clamp)

Stand, boom, or grid position

Floor footprint

None when overhead-suspended; stand-mounted configurations use floor space

Stand-mounted requires floor space; grid-suspended softboxes may not

Ceiling height

Can work in lower ceilings than helium float requires

Stand-mounted; ceiling-independent

Rigging hardware

Approved load-rated attachment layout, possibly multiple points (model-specific)

Stand, boom or approved overhead attachments (design-specific)

Repositioning

Rigging-dependent; faster than deflate/re-float helium

Fast within stand/boom range

Crew requirement

Grip/rigging team for suspension

Grip for stand/boom placement

Best suited for

Sets with overhead structure but no helium access or clearance

Sets with floor space and directional control needs

The principal trade-off is the feasible mounting method and the kind of light required. Both balloon lights and softboxes may be overhead rigged in approved configurations; neither should be described as inherently floor-free or stand-only.

When Air-Filled Balloon Rigging Solves the Problem

The location has rigging but no helium logistics.

Studios with pipe grids, stages with permanent truss, and locations with existing overhead structure are natural candidates for air-filled balloons. The rigging already exists. The balloon simply attaches to it. No helium cylinders, no delivery scheduling, no gas cost line in the budget.

The ceiling is too low for safe helium float.

Helium balloons need vertical clearance to float safely. In low-ceiling studios, basements, or practical locations with obstructions, air-filled suspension can position the balloon closer to the ceiling while maintaining a safe attachment. The light still comes from above; it simply hangs rather than floats.

The shoot moves between setups.

A helium balloon is buoyant but not easily repositioned once floated. An air-filled balloon suspended from a pipe grid can be moved along the structure or re-rigged between setups. For productions that need the same soft source in multiple positions during the day, rigged suspension offers more control.

Wind or outdoor conditions make helium impractical.

Outdoor helium use is subject to wind limits that vary by model. Air-filled configurations can be anchored more securely and present different wind-load characteristics. For sheltered outdoor sets or locations where wind monitoring adds production risk, air-filled rigging may be the more controlled choice.

When a Softbox Is Still the Right Answer

No overhead rigging exists.

If the location has no truss, no pipe grid, and no structural attachment points, an air-filled balloon has nothing to hang from. A softbox on a stand is the practical solution. This is a site-physics constraint, not a product limitation.

Directional control is the priority.

A balloon emits radially. A softbox points. For interviews, close-ups, and product work where the DP needs precise falloff and a defined key direction, the softbox remains the correct tool. Air-filled rigging changes where the balloon lives; it does not change how it emits light.

The crew is small and the package must travel flat.

Air-filled balloons still require envelope material, inflation equipment, and rigging hardware. A softbox packs into a bag and deploys on a stand. For a one-person crew or a travel-heavy schedule, the softbox is lower-friction.

Technical Notes for Air-Filled Artemis Configurations

The following points reflect btcoops.com’s listed specifications. Confirm current model data with BTCOOPS before specifying a unit.

Supported shapes for air filling: Sphere, Ellipse, Cube, and Tube versions are listed as supporting air filling for suspension/rigging.

Sphere dimensions (helium reference): 2.5m–5m diameter. Air-filled sphere configurations use the same envelope but require suspension points rather than float clearance.

Ellipse dimensions: 3.4×3.4×2.6m and 2.6×2.6×2m listed. Custom sizes available.

Light sources: HMI (5600K), tungsten (2900–3100K), hybrid, and customized LED. CRI≥95 for the 6kW HMI reference model.

Rigging hardware: Multiple D-rings and reinforced attachment points on the balloon envelope. Confirm load ratings and suspension method for your specific model.

Fabric: Lightweight, helium/air-tight, flame-retardant, resistant to yellowing and hydrolysis.

Air-Filled Balloon Rigging: Pre-Installation Procedure

Step 1 — Identify the exact fixture SKU, inflated envelope size, fully assembled mass, attachment locations, and manufacturer-approved suspension method. Step 2 — Have the venue or responsible rigger verify structural capacity and permissible loads. Step 3 — Specify compatible rated clamps, slings, secondary safety attachments, cable support, and inflation equipment. Step 4 — Agree exclusion zones, height clearances, access and emergency removal. Step 5 — Inspect attachment points and electrical cables before energizing; record the sign-off.

Common Rigging Mistakes to Avoid

Do not attach a balloon to an unverified decorative beam, ceiling grid, or unapproved stand. Do not assume an air-filled balloon has negligible wind load outdoors. Do not rely solely on a single published installation-time figure for a different product. Do not assume a softbox always takes floor space; overhead-mounted softboxes are also used in film studios.

Air vs Helium: What Can and Cannot Be Said About Output

With the same light engine, envelope geometry, diffusion material and operating conditions, the gas selection is primarily a positioning decision. Actual output and distribution may differ if envelope tension, shape, material, internal alignment, dimming or power configuration changes; photometric claims should be checked using the specific installed configuration.

Evidence to Show in This Guide

Add an annotated real installation photograph showing each approved suspension point; a dimensioned rigging drawing; close-ups of rated hardware; an equipment checklist; and a short deployment log listing crew, setup window and the exact tested model. Obtain manufacturer and site-rigger confirmation before posting load ratings or safety instructions.

Supplemented technical evidence from Artemis manufacturer samples

Evidence classification: the figures below are published manufacturer-catalog specifications or a manufacturer lighting-chart example. They are not independently verified field measurements, site approvals, or guarantees for a different SKU. Confirm the current datasheet and installation manual before specifying equipment.

What the product documents do—and do not—authorize

The Artemis daylight cutsheet states that balloon models, in addition to helium-filled floating, may be air-filled for hanging or suspension in a proper way and space. This establishes manufacturer-described application capability, but it is not a rigging drawing, rated lifting instruction, WLL certificate or approval for a specific roof/truss. [Source S1, p.4]

The Fenigal 2025 brochure illustrates sphere, ellipse, tube, pad and cube geometries, as well as photographed overhead setups. These visuals are helpful for identifying possible arrangements; they contain no verified suspension-point load values, site engineer sign-off, hardware part numbers or crew records. [Source S2, pp.5–9, 11, 13]

Model-specific pre-rigging sheet: example fields grounded in actual catalog dimensions

Reference model

Catalog envelope dimensions

Suspended weight / WLL

Installation approval

Sphere2400DL HMI

Ø3.2 m

Not stated in supplied samples

Manufacturer + venue rigger must verify

Sphere LED4800

Ø5.0 m

Not stated in supplied samples

Manufacturer + venue rigger must verify

Tube4800DL HMI

Ø2.8 × L6.6 m

Not stated in supplied samples

Multi-point plan requires engineering review

Sizes: [S1, p.4] and [S2, p.12]. Do not use envelope volume or lamp wattage as a substitute for the assembled weight or design load. Wind pressure, dynamic effects, cable strain and secondary retention need project-appropriate assessment.

Practical inspection sequence before energizing

· Identify exact SKU, fixture mass, attachment locations and the latest manufacturer-approved mounting instructions.

· Have a competent site rigger check truss/beam/grid ratings, load path and any secondary retention requirements.

· Check approved clamps, slings, fasteners, attachment fabric points, cable strain relief, emergency descent and exclusion zones.

· Inflate only according to the actual model instructions and verify distance to ceilings, sprinklers, scenic materials and moving camera equipment.

· Record inspection sign-off, crew roles, site photographs, power details and measured setup time.

No load rating, clamp quantity, wind threshold or “safe minimum distance” is supplied in the uploaded documents for these exact configurations. None should be invented. For field use, obtain a signed model- and site-specific plan.

FAQ

Q: Can every Artemis balloon be air-filled instead of helium-filled?

A: btcoops.com lists the Sphere, Ellipse, Cube, and Tube versions as supporting air filling for suspension and rigging applications. The practical suitability depends on the specific model and the rigging available at your location. Confirm with BTCOOPS before planning an air-filled configuration.

Q: Does air filling change the light output?

A: Not necessarily in every setup. With the same light engine, envelope geometry and operating settings, emission can be similar. Helium provides lift, while air filling requires external support; verify model-specific photometric data.

Q: How is an air-filled balloon actually rigged?

A: The balloon is suspended from overhead attachment points using its reinforced D-rings and appropriate rigging hardware. The specific method depends on the structure available (pipe grid, truss, beam) and the balloon size. A grip or rigging team should plan and execute the suspension.

Q: Is air-filled rigging faster than helium setup?

A: It depends on the rigging infrastructure. If overhead points already exist and the crew is familiar with the space, air-filled suspension can be straightforward. If rigging must be built from scratch, it may take longer than a helium float. The 6kW HMI 4.2m model lists setup under 15 minutes for helium float; air-filled setup time depends on the rigging required.

Q: What happens if there‘s no overhead structure at all?

A: An air-filled balloon requires attachment points. If none exist, a softbox on a stand or a helium balloon (if clearance and gas are available) are the alternatives. Discuss your location constraints with BTCOOPS before committing to a balloon-based approach.

Request a Rigging Configuration Review

Every location has different overhead structure, ceiling height, and helium access. Rather than specifying a balloon or softbox from a general comparison, send us your site parameters and we will confirm which Artemis configuration fits your rigging reality.

What to include in your inquiry:

Location type (studio with grid, stage with truss, practical location)

Overhead structure available and load capacity

Ceiling height

Helium access (available, unavailable, or impractical)

Shooting schedule and repositioning needs

Preferred light source (HMI, LED, tungsten, hybrid)

Source notes and verification boundary

· [S1] Artemis Balloon Lighting — Daylight 5600K, manufacturer cutsheet, pp. 3–4: HMI model dimensions, power, maximum luminous output, envelope volume, indicative setup times and Ellipse4800DL lighting chart.

· [S2] Fenigal Lighting Balloon — Film and Television Shooting, 2025 Product Brochure, pp. 5–13: product/application images, LED product family specifications and sphere/ellipse control and PSU options.

· [S3] PSU channel explanation, p. 1: example 16-channel effects/GEL priority and RGBA/white control notes; current SKU firmware and values require checking.

· Catalog imagery is not proof of a named customer project. Available uploads do not establish actual softbox comparison measurements, independently verified lux, rated suspension loads, site deployment costs or signed on-set records.

Product inquiry: https://www.btcoops.com/  |  Manufacturer technical review required for model-specific configuration.

Supplementary LED hybrid configurations for pre-rigging review

The following design information was supplied for this editorial update. It is configuration input, not a verified rigging certificate, measured lift test, rated working load or evidence of approved 30 m deployment. Confirm the current build, exact product family and electrical documentation before quoting or publishing definitive claims.

Proposed configuration

Lamp / CCT

Envelope / volume

Controls / power

Artemis Tube LED1800W HYBRID

900 W warm 2600 K + 900 W cool 6200 K; tunable 2600–6200 K

Ø2.5 m × L5.0 m; 24.5 m³ / 865 ft³

DMX; integrated PSU, AC 120/230 V; DC 48 V / 37.5 A

Artemis Ellipse LED1800W HYBRID

4 × 450 W hybrid; 900 W warm 2600 K + 900 W cool 6200 K

3.8 m diameter × H2.9 m; 21.8 m³ / 770 ft³

DMX; integrated PSU, AC 120/230 V; DC 48 V / 37.5 A

Artemis Pad LED1000W HYBRID (nominal series label)

480 W warm 2600 K + 480 W cool 6200 K = 960 W listed emitter sum

L3.5 × W3.5 × H1.3 m; 15.9 m³ / 561 ft³

DMX; integrated PSU, AC 120/230 V; DC 48 V / 20 A (960 W electrical output nominal)

Note on ratings: “LED1000W” is a product/series label in the supplied text, while the two specified 480 W channels total 960 W. Likewise, the DC outputs shown are nominal arithmetic ratings (48 V × 37.5 A = 1800 W; 48 V × 20 A = 960 W), not independently measured AC input consumption. Verify final current draw, supply efficiency, cable voltage drop, heat, connector rating and approvals.

Revised ground-control concept and 30 m cable engineering review

· Control relocation: the previous controller suspended inside the envelope is removed in the proposed revised design; lighting control is placed in a ground-based equipment case. This is not the earlier in-balloon smart-control edition.

· Cable revision: a custom, lighter approximately 30 m electrical/control cable is proposed so the installed system can reach a planned height of up to 30 m, subject to engineering verification. Exact cable gauge, mass, conductor count, voltage drop, connector and strain-relief design remain to be checked.

· Envelope redesign: one cube-family envelope concept increases from 3.0 × 3.0 m to 3.5 × 3.5 m. Do not imply that this change is the same model as the Pad LED1000W configuration above without an engineering-issued product identifier.

· 30 m is a theoretical design target only, not a certified operating height. Obtain signed configuration-specific lift/ballast, tether/wind, cable weight and load-path calculations, electrical safety checks, manufacturer installation approval and site authority acceptance before declaring it viable.


Pre-Rigging Request Sheet: What the Buyer Must Confirm

Required input

Buyer / venue information

Responsible verification

Exact fixture SKU and balloon size

__________________

Manufacturer technical team

Fully assembled suspended mass

__________________

Manufacturer current datasheet

Suspension points and rated attachments

__________________

Approved manufacturer drawing / qualified rigger

Support grid/truss and available capacity

__________________

Venue engineer / rigger

Secondary retention and emergency lowering

__________________

Qualified rigging plan

Power, controller and cable loads

__________________

Electrical lead + manufacturer

Wind exposure, exclusion zones and clearances

__________________

Venue/site responsible person

Inspection and sign-off date

__________________

Competent installer

Conceptual Installation Sequence — Not an Approved Rigging Diagram

Site survey → exact SKU and masses → approved attachment/load-path design → compatible certified hardware and secondary retention → routing/strain-relief review → controlled inflation and inspection → electrical test → documented sign-off. The sequence describes planning responsibility only; it intentionally does not prescribe clamp counts, load limits, anchor spacing or safe clearances that are absent from the supplied manufacturer documents.

Thirty-Meter Cable and Ground-Control Concept: Engineering-Pending

The proposed relocation of the controller to the ground and approximately 30 m cable are design inputs only. They are not verified maximum suspension height or an approved installation. A qualified design review must consider cable mass, voltage drop, connector rating, strain relief, electrical protection, ballast/PSU placement, tether behavior and any changes to lifting and dynamic loads.

Marketing image brief: request actual photographs of each attachment point and hardware identifier, an approved load-path drawing, the matching controller and connector, and an installation showing cables and secondary retention. Do not replace these with AI-generated “approved” hardware photos or use conceptual diagrams as engineering instructions.

 


Project Inquiry · Technical & Commercial

Send Your Custom Product Requirement

Tell us the product family, intended application, size, quantity, operating conditions and delivery target. Your inquiry email will automatically include the page you are viewing so our team can understand the exact product, technology or reference that led to your request.

  • Product family or model of interest
  • Required size, quantity and customization
  • Application, installation and operating environment
  • Project country, operating conditions and delivery target
Inquiry context Current page details will be attached automatically.